100% Printable Drone Joystick For Radclo And Many Others
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made another joystick mod for my Radclo drone last year, but I wanted something a bit nicer and a bit more permanent..
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
I made another joystick mod for my Radclo drone last year, but I wanted something a bit nicer and a bit more permanent than gluing something on. So I designed this in FreeCAD to be printed with a tpu part and a part made out of PLA. This Joystick fits on a Radclo quadcopter, but it should fit any controller that has a joystick knob of around 3.4-3.5 mm.
It is a little tricky to print the part that Is PLA, but if you put it face down with supports it works fine. For the TPU part put it face up with supports on.
To hold the two parts together best use superglue.
Printing Settings:
| Resolution : | 0.2 | Support: | YES |
| Infill : | 20% | Raft: | NO |
| Material: | PLA and TPU | Filament Designation : | Color of drone |
More designs


