1 / 4
DN 100 Kanalrohr Adapter / DN 100 sewer pipe adapter — zdjęcie 1
1 / 4

DN 100 Kanalrohr Adapter / DN 100 sewer pipe adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Inverse Connector for DN100 / Umkehrverbinder für DN100

Ocena
0 / 5
Polubienia
5
Pobrania
40
Wydruki
0
Wyświetlenia
273
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

In meiner Zisterne wurde der Anschluss vom Überlauf falsch montiert - Dieses wurde von Außen nach innen hineingesteckt. Dadurch kann ich den Spaltfilter nicht am Überlauf anschließen.

Der Adapter hat als Außendurchmesser, den Innendurchmesser eines DN100 Rohres. Somit kann dieser Adapter in ein DN100 Rohr hineingeschoben werden, Die Dichtlippe ist etwas größer und sollte zum Einbau gut geschmiert werden.

Grün = eSUN ABS+ Filament

Schwarz = Overture 95A TPU

 

English:

In my cistern, the overflow connection was installed incorrectly - it was inserted from the outside to the inside. This means I cannot connect the gap filter to the overflow.

The adapter has as outside diameter the inside diameter from a DN100 pipe.

This adapter can therefore be pushed into a DN100 pipe. The sealing lip is slightly larger and should be well lubricated for installation.

Green = eSUN ABS+ filament

Black = Overture 95A TPU