1 / 2
Edge Band Trimming Guide for 1/2" (12.5 mm) material
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use this guide and a utility knife to trim the edge banding on 1/2" material.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution
This guide is for trimming the edge banding on ½" (12.5 mm) cabinet parts.
How to use:
With one hand, grasp the guide on the “Top” (indicated in the picture) and register the bottom and side on the workpiece. With the other hand, slide the tip of a utility knife into the groove. Push or pull the guide along the length of the workpiece. Rotate the guide to the other side of the edging and repeat the process. The edge banding should be trimmed flush to the workpiece.