1 / 4
FRC 2025 Reefscape Reef Hub PVC Fittings — zdjęcie 1
1 / 4

FRC 2025 Reefscape Reef Hub PVC Fittings

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fittings to construct a PVC reef at home for FIRST Reefscape

Ocena
4,5 / 5
Polubienia
25
Pobrania
841
Wydruki
2
Wyświetlenia
2836
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Public Domain

These fittings will allow you to make a Reef Hub for the 2025 FRC game Reefscape out of PVC pipes.  Each fitting is split in half to allow easy printing and alignment of the layers for maximum strength.  Glue everything together with hot glue if you want it fast, or a slower curing glue to make sure everything is aligned properly.  I printed the sample pieces out of ABS with 3 perimeters and 15% infill, which seems to provide plenty of strength.

 

To assemble one full hub you will need:

(2) 35 degree T connector half prints

(2) mirrored 35 degree T connector half prints

(2) level 4 offset half prints

(2) mirrored level 4 offset half prints

(1) 23.125" length of 1.25" schedule 40 PVC

(1) 13.875" length of 1.25" schedule 40 PVC

(1) 12.25" length of 1.25" schedule 40 PVC

(1) 8" length of 1.25" schedule 40 PVC

(1) 6.875" length of 1.25" schedule 40 PVC

(2) 10.5" lengths of 1.25" schedule 40 PVC

 

 

**UPDATE**

  • Added bevels to the allow easier insertion into PVC tubes
  • Added variant with holes to allow installation of a 54" long piece of ¾" EMT conduit for greatly increased stiffness (fit has not been verified yet, modeled based on EMT dimensional specs)