1 / 1
Cuisinart Slow Cooker Lid Handle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement handle for Cuisinart PSC-350 slow cooker lid
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
There were similar models online but were much bigger and couldn't really reuse the existing rubber seals so I made this.
Printed in PA6-GF25 because I wanted something with a lot of temp resistance.
4 perimeters
Supports underneath (although I excluded any supports from the center hole for the heat set insert because they are hard to get out)
I also added just a little support in the very middle of the handle on top.
I think the .3mf file should have all the settings I used saved in it.
Used an M4 x 6mm deep heat set insert.