Clerx Boeing 747SP Landing Gear Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add landing gear in place of the stand on Clerx's wonderful Boeing 747SP model.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a slight remix of Clerx's wonderful Boeing 747SP model that adds landing gear in place of the stand since I personally think it looks better that way.
If you are looking for a more accurate version, please check out my remix.
Modifying Objects
IMPORTANT: You must add holes into the fuselage sections where the landing gear should slot. To do this, right-click on the fuselage, select add negative volume, then choose ‘cylinder’. The diameter of each cylinder should be 3mm. Refer to the cover photo for placement. Alternatively, you can use the included .3mf file. You should probably also cover up the hole where the stand would go.
Once you print the model, you only need a little super glue to attach the wheels. If you try to attach the wheels without adding holes, it will be uneven.
Print Settings
Print without supports and if desired, with a brim. I would recommend setting the infill percentage to at least 60% for the landing gear and 5% for the fuselage.
Other
If you found this model useful, please give it a like, as it really helps me out.