Kreg Accu-Cut wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed model of Kreg Accu-Cut wall mount
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 110
- Wydruki
- 1
- Wyświetlenia
- 541
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a remix of ArrowMakes Model of the Kreg Accucut Wall Mount.
Redesigned the whole locking mechanism to highly improve rigidity. The printed bolt on the original version was shearing of super easy if a bit overtightened.
Got carried away and overengineered it a little bit.
Added 2 sizes for the locking mechanism in case of using smaller guiderails.
You need 1 x M3x25 (minimum length, longer will work as well) and 1 x M3 Hex-Nut.
The tolerances for screw and nut are pretty tight. they are pressing in and don't turn this way.
Hope you like it. If you have any suggestions or need parts with other dimensions, let me know. Happy to help you out.
Cheers
| Updates | |
| 06/01/2025 | initially published following versions: “Kreg Accu-Cut wall mount - short arm” 3mf assembly “Kreg Accu-Cut wall mount - long arm” 3mf assembly “01-Main_body” stl file “02-Locking_arm_short” stl file “03-Locking_arm_long” stl file “04-Nut” stl file |