Label Station - Marker and Tape wall holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds a marker + roll of tape for labelling boxes in a storage room.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Wall-mounted label making station for my storage room.
I never label my storage bins because I never have a marker + tape handy when I need it. Now that they have a home on the wall it's easy to remember and keep the tape + marker available.
Printed in PETG @ 15% infill. Affix to wall using two-sided tape. My photo is of a slightly earlier version with 40% cutout and 60mm stem. After printing, reducing the cutout and stem length seemed appropriate to add a bit more toughness to the build.
Two STL files are supplied - one for a 12mm Sharpie and one for a larger generic marker. If you want to adjust it further the OpenSCAD model is included and most size variables are defined at the top.