1 / 13
5.25 3x drive bays to 120mm fan converter for Corsair Carbide 200R PC case — zdjęcie 1
1 / 13

5.25 3x drive bays to 120mm fan converter for Corsair Carbide 200R PC case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple converter to put a 120mm fan into the 5.25 drive bays of a Corsair Carbide 200R PC case.

Ocena
5 / 5
Polubienia
7
Pobrania
90
Wydruki
1
Wyświetlenia
822
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Share Alike

A simple converter to put a 120mm fan into the 5.25 drive bays of a Corsair Carbide 200R PC case.

IMPORTANT NOTE FOR PRINTING: the .stl files has no mesh. You need to create the mesh in your slicer. 
To do this, in your slicer:
- Set the top and bottom layers thickness to 0
- Play with the infill settings to create the mesh you prefer
- Make sure you have enough outer walls to ensure the part has enough strength
I included some screenshot from my settings in Cura 5.8 (please note I use a 0.6 nozzle, if you use a 0.4 I suggest using 4 or 5 outer walls)

Parts needed
- 120mm PC fan
- 4x self-tapping screws (usually included with the fan)