1 / 9
[Option 2 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip with EXTENDED HANDLE — zdjęcie 1
1 / 9

[Option 2 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip with EXTENDED HANDLE

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Easier to use, both for removal and installation, because of having more to grab ahold to!

Ocena
5 / 5
Polubienia
118
Pobrania
709
Wydruki
4
Wyświetlenia
2137
Oceny
7

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor.

OPTION 2 of 3 — EXTENDED HANDLE — Easier to use, both for removal and installation, because of having more to grab ahold to!

PLA. Print as oriented. I used 0.2 mm layer height on 0.4 mm nozzle. Enjoy.

- - - - - - - -

I used digital calipers to measure and recreate the C-Clip used on both sides of the runout sensor on the Flashforge AD5M because one of mine got sucked into a clip-eating black hole. 

Then I went above and beyond and made two more options for it.  Speaking of the other two options… see below.

  • The 1st option is a clone of the stock factory clip - CLICK HERE.
  • The 2nd option is this one with the extended handle - THIS LISTING.
  • The 3rd option is a TPU print that tethers to the PTFE tube -  CLICK HERE.