1 / 3
RERF Grid for Anycubic Photon Mono 4 + SCAD file
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a grid for helping positioning exposure test models for Anycubic's Resin Exposure Range Finder (RERF) feature.…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 100
- Wydruki
- 0
- Wyświetlenia
- 350
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Share Alike
This is a grid for helping positioning exposure test models for Anycubic's Resin Exposure Range Finder (RERF) feature. The dimensions are set for the Photon Mono 4 bed, and should fit any bed with same width and length.
Also throwing in the .SCAD file so you can adjust parameters for any bed size.
More on how RERF works:
- Import the grid.stl file into your slicer
- Center the model in the print area
- Position your favorite exposure test model into the grid. You'll need 8 copies. Make sure the models do not overlap grid spaces.
- DELETE the grid (unless you want a physical grid as memento)
- Slice it and save it (check FauxHammer's videos about details on this step)
Category: 3D Printing Tests