Ender 3 S1 Platform + SWorks and STEP Files!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Platform to sit, or mount, objects as needed. Interface MUST be relocated!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
NOTE: This uses the location where the stock Ender 3 S1 interface is located and WILL interfere with the interface. The interface must be relocated!
I designed this platform to mount my camera so I could actively watch my prints. I had already relocated my interface to be outside of my enclosure, so naturally this spot was open and available for use.
I used PETG but PLA should be absolutely zero issue.
Uses original screws- screw hole opening is a “snug” fit, but you can easily twist the OEM screws through the holes with your hand before placing against the printer and using the appropriate allen wrench.
STEP and Solidworks files included if you want to modify!