Alternative Cam-Holder for Anycubic-Cam (Kobra 2 and 3)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alternative Cam-Holder for Anycubic-Cam (Kobra 2 and 3)
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 303
- Wydruki
- 0
- Wyświetlenia
- 1534
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Deutsch:
Mir gefällt die Anycubic-Lösung für die Halterung der eigenen Cam nicht. Da ich die Cam am Kobra 2 Pro und Kobra 2 Max im Frontbereich haben wollte, habe ich diese Lösung kreiert.
Durch das Kugelkopfgelenkt kann die Kamera nach belieben justiert werden.
Zum befestigen der Base werden vier Schrauben M4x10 und vier Hammer-Muttern benötigt. Das Kugelgelenk einfach mit einem Kleber an das Gehäuse an der vorgesehenen Stelle ankleben (ACHTUNG: vor dem Ankleben muss die Überwurfmutter darüber gezogen werden!!!).
English:
I don't like the Anycubic solution for mounting my own cam. As I wanted to have the cam on the Kobra 2 Pro and Kobra 2 Max in the front area, I created this solution.
The camera can be adjusted as required using the ball head joint.
Four M4x10 screws and four hammer nuts are required to attach the base. Simply glue the ball joint to the housing at the intended position (ATTENTION: the union nut must be pulled over it before gluing!!!).