Ring Stick Up Cam Pro (Solar) 102mm/4" Pole Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for a Ring Stick Up Cam Pro and a Ring Solar Panel to mount on a 4" diameter pipe
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Remixed from a 3" version that used M4 screws. Tried to replicate original design as much as possible but made two changes:
1) This now mounts on a 4" pipe (like a PVC radon mitigation system pipe). For some reason, my 4" pipe was actually something like 4.1" in diameter, so this wasn't the perfect size, and the brackets had to bend a bit. However, it still worked.
2) Holes on side are now for a M3 socket cap machine screw. Note - holes were modeled to 2.5mm but were a bit tight - I needed to drill them out a tiny bit with a 2.6mm drill bit