1 / 10
Printable Roborock S7 MaxV Ultra station water filter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Water filter with removable filter for Roborock S7 MaxV Ultra. You will also need a 6x2.5 magnet and M3x10 screw
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 171
- Wydruki
- 0
- Wyświetlenia
- 993
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (0)Kolekcje (62)Powiązane
My stock OEM water filter get very dirty and very hard to clean because two layer design.
I create my own replacement with removable filter plate.
Now I can clean it more easily or just re-print a new one. The stock float sensor can be reused with this printable one as well.
You will also need a 6x2 magnet and M3x10 screw if you want use printed float sensor.