Overengineered green Laser holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An overengineered green laser holder for astronomy and telescoping
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial
Do you get bored of most finderscope holders's screws scratching your green laser casing but you don't mind because it doesn't affect the functionality of the laser, but it still bites the back of your mind?
If yes, then you should make this, you will need some screws, nuts, washers, springs and a bearing for assembly, but it works REALLY well.
External part list:
1x M8 screw and a nut
5x M3 x10+ screws and nuts
2x M4 screws and nuts
3x M6 screws and nuts
3x spring
1x 22 mm outer diameter, 8 mm inner diameter bearing
1x Axle, at least 65 mm long and 3 mm wide
Some externaly sourced parts will need to be press fit into the 3d printed parts due to hole tightness, other parts are easily put together, message me for guidance of assembling if needed :)
For hex screw users, i have a collection of hex screw knobs for M3, you will probably need to scale them 1.8490566037735852 for M6, and 2.424528301886792 for M8 in the slicer