Ryobi 40V Battery Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a high strength storage solution to hold your Ryobi 40V batteries.
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 423
- Wydruki
- 3
- Wyświetlenia
- 790
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a storage solution to hold your Ryobi 40V batteries. It's a bit over-engineered and more beefy than other options out there. I have some 6aH batteries that are really big that this model holds with ease. It will also fit all 2aH and 4aH versions of Ryobi 40V batteries.
Print it vertically (flat “bottom” side with no holes/pockets down) with no supports in PLA or PETG. Default print settings work well. Add perimeters for more strength, but it shouldn't be necessary.
Use #6 or #8 screws to attach it to a wall or bottom of a cabinet. The batteries lock into place so it can even be installed upside down. 2 screws are enough but there are 3 holes available for extra strength.
There's an offset on the backside so the battery lock button can be pressed to release it from the holder while installed.