Customizable 3 Tumbler Combination Lock Safe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed a safe that is fully printable and can be customized to set your own combination code
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 654
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a three tumbler combination lock safe that I designed in Onshape. The whole thing including the screws can be 3D printed.
I've included both preconfigured 3mf files that are ready to slice and print. But I also included all the raw STEP files for all the parts. Preferably if you have a compatible slicer, just use the 3mf files since I have certain settings in there such as preferred layer height and infill.
The instructions on how to assemble and set the combination will be in the picture section of this page. So just follow along with those. Here is the Onshape link to the safe if you want to make your own changes.
If there is any feedback please give it to me. I think this can be improved a lot and I will probably revisit it at some point.