Cup Holder++ (parametric, includes sizer)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A model for converting one, older, smaller cup holder into 2 large cup holders with slots for 2 phones
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple model that upgrades the center console cup holder from one small cup holder to two medium-large cup holders with a slot at either end for a phone
Tested against late 90s toyota models (comment useful measurements for your model of car and i'll include them in the next version!)
Project includes 3 models:
- Cup Holder Sizer.stl - to confirm the cup holder size before committing to a full print
- twoLargerHolder.stl - two larger cup holders with a slot at either end for a phone
- oneLargerHolderOneSmallerHolder.stl - one larger cup holder and one smaller cup holder with a slot at either end for a phone
V3.1 updates (Blue Model)
- Add Gaps to reduce filament use (and weight for fuel efficiency!)
- Add Phone cord gaps
V2.0 updates (Black Model):
- Making the cup shorter and wider at the top & bottom (remove the need for tape)
- Slightly narrower cup holder diameter at the brim and base
- Reduce sharp edges (better align cup & phone holders in the center)
You can adjust the cup holder size via these params in the openscad file:
in_car_cup_holder_height = 56;
in_car_cup_holder_top_diameter = 78;
in_car_cup_holder_bottom_diameter = 66.5;
in_car_cup_holder_center_offset = 16;
Be-aware of the limitations of the material you are using, PLA can have a very limited lifespan as it will deform and warp in the sun/heat of the car (https://3dprinting.stackexchange.com/questions/6119/can-you-put-pla-parts-in-your-car-in-the-sun)