Dummy 13 Stand - Strong Transparent
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for the REALLY big jumps, and the itty bitty ones! A transparent stand for dummy 13.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 322
- Wydruki
- 1
- Wyświetlenia
- 1370
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Sorry some of the photos aren't great. Camera's don't like transparent plastic.
This stand is an improved version of the dummy 13 stand by Soozafone. I didn't like how little weight it could hold, so I fixed it. This file may not work the greatest with infill and thick walls. The original file was 1 wall, no infill. This makes transparent filaments turn out really really clear. You can print in regular filament, I just recommend the same kind of infill and such (the base is really light). The base is much smaller to save time and filament, but requires aerial poses be above the base to prevent tipping. The base was printed at 2 walls, 50% infill. Everything was made in PETG.
It can be a little tricky to balance at times, but it always stays once balanced.
The “female” adapter file was designed for 90% scale with a 100% base, because that's how I printed mine. Take it or leave it.
Please don't sell this. If you use it in a video and make money off the video is totally fine, but putting out there for people to buy isn't. Designing files like this can be difficult, and I don't have a ton of time. If you are selling dummy 13, the base it comes with is probably the best way to go.