1 / 6
Sony camera battery holder with clip (NP-FV50)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wear it on a belt, pocket, bag or everywhere you feel it handy. A battery quick swap solution.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 502
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — NoDerivatives
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (31)Powiązane
Wear it on a belt, pocket, bag or everywhere you feel it the most handy. A battery quick swap is here! No more lost moments due to fresh battery was buried deep in a bag.
I used PETG as it is more flexible than PLA. But PLA should work fine too.
Settings are following:
- 5-6 walls
- layer height 0.2 mm or less
- 25% infill
- Tree supports for locks and clip
- Brim - optional. Depends on adhesion of a heatbed.
Assembly guide:
- inject 2 heat inserts into main part
- screw clip with 2x M3 10mm screws
Have a great shots! ;)
Support creator here: