1 / 5
Print in Place Hinge | Bisagra print in place
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3 cm wide hinge with two countersunk screw holes, ready to use, opens up to 180°. Bisagra de 3 cm de ancho. PrintInPlace
- Ocena
- 4,5 / 5
- Polubienia
- 51
- Pobrania
- 788
- Wydruki
- 2
- Wyświetlenia
- 1879
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (76)Powiązane
Print in Place Hinge
Print in Place Hinge with two countersunk screw holes on both flaps. No assembly required, print ready to use. 3 cm wide with an opening capacity of up to 180°.
Bisagra impresión en el lugar
Bisagra print in place con dos agujeros para tornillos avellanados en ambas pestañas. No requiere ensamble, impresión lista para usar. De 3 cm de ancho y capacidad de apertura hasta 180°.
