Car mount for Nexus 5 wireless charger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fixture for using a nexus wireless charger as a dash mount for my Nexus 5 phone.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a fixture for using a nexus wireless charger as a dash mount for my Nexus 5 phone. It is printed in two pieces which are fastened together using a screw (a little glue is also helpful). The ball socket works with many standard dash mounts (~17 mm ball). The tabs on the socket are designed to use a GoPro screw and nut. But, I did have to cut the GoPro screw a bit shorter.
I suggest printing the socket with 100% fill, so that it survives being pressed onto the ball. Also, print the socket with the cylinder section on the bottom, so you don't have to clean support material out of the socket.
The socket portion of this design was inspired by: http://www.thingiverse.com/thing:631379
Print instructions
Category: Mobile Phone Print Settings
Printer Brand: LulzBot
Printer: TAZ 5
Rafts: Doesn't Matter
Supports: Yes
Infill: 100% for the socket