Sling Tsi - Side Air Duct Splitters - Version 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design splits the air intake 50/50 between the front and rear seats.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a design for the side air ducts on a Sling Tsi aircraft to split the airflow entering the plane. The intake slides over the naca duct, the front outlet has a 50mm diameter and the rear passenger side panel outlet is 88mm x 24mm.
The design has an internal splitter which sends 50% of the airflow to the back seat passengers via the side channel and 50% of the air to the front seat vents.
It has been designed to be printed with a wall thickness of 1.8mm from PETG for long term durability.
There is an internal splitter which sends 50% of the airflow to the back seat passengers via the side channel and 50% of the air to the front seat vents.
A 1.0mm nozzle was used with a 0.32mm layer height. Wall thickness is 1.8mm. A 50mm brim was also used to provide a strong connection to the plate as the finished item is large.