Smart Button Tuya Zigbee Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple print to mount Tuya smart buttons wherever you want but also be able to easily remove them. They could have more than one use, when you need to change the battery or need to reset it. I use them with Home Assistant.
I'll provide a link to the buttons in AliExpress below, but they are very common. I bought them 3 different times from different sellers, and they were all the same… 50mm diameter and same depth.
They have a good friction fit, yet you can still remove them.
I printed with PETG and 5 walls. The 5 walls allowed for no infill but is still less than 10g a print.
Ideally, you'd print these vertically, but with the chamfer and the fact that it's not being bent much means the easier horizontal print is plenty strong enough.