Educational Sailboat Toy With The Sail And Mast Separated
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The sail and mast are separated. Perfect for printing the sail in a different color/material than the mast.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 264
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Attribution — Share Alike
Introduction
This version has the sail and mast separated into two parts. This allows standard printers to get the sail and mast to be different colors. I also found it interesting to print the sail in TPU.
See the original model for more information.
This model is for the starboard version of the boat. If you want to use this on the port version of the sailboat, mirror these parts in Prusa Slicer.
Printing
This part prints better with a brim because it has a very small footprint.
Supports are not required.
Assembly instructions
Remove as all supporting material from the base. A deburring tool can be helpful for this.
Before assembly, place glue in the slots in the mast and boom. I recommend using Super Glue for PLA, and E6000 for PETG.


