Neptune 4 Mini Shroud (LS Fanmod compatible)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Naked Bike inspired mini Shroud for Stock Assembly and LS-Fanmod
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 104
- Wydruki
- 2
- Wyświetlenia
- 901
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mini Shroud itself is attached to the Extruder Motor Screw. Its recommended but not necassery to replace extruder screws with M3x14mm ones to get more thread engagement.
For Stock Extruder Assembly
The Outside screws holding the stock Shroud on are removed from the machine in this scenario. If you use anything that screws on top of the stock shroud please use attached washers to provide the same spacing as before.
Caution: If screws are inserted without Shroud/washer in Place you can scratch the x-Axis Extrusion!
Stock: 28g
Mini: 6g
LS Fanmod Users
This is a direct replacement for the regular Shroud setup to provide a naked look Fanmod with ‘some’ shroud but minimised weight.
Printing Recommendations
- model comes with builtin supports
- after printing wiggle the support structure to break loose
- if supports are fused to the model use razorblade or similar
- relocate Seams so they arnt visible on the outside surface or edges
- Arachne: min wall width: 75%
-----
Feel free to buymeacoffee.com/lamarc