LED strip holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed this holder to attach an LED strip to an Skadis board. Works with 9mm strips. Attach it with double sided tape.
- Ocena
- 4,4 / 5
- Polubienia
- 657
- Pobrania
- 868
- Wydruki
- 6
- Wyświetlenia
- 8668
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
This holder was designed by me to add a LED strip to a skadis board from IKEA to add some lights with WLED to it.
It fits very well to 9mm LED strips but feel free to scale it to other sizes.
It can be easily attached to any flat surface with double sided tape.
It takes 12 min to print 4 of them with a MK4S and costs roughly 8 cents.
No special print configurations, I just printed it with PLA and 0,2 layer height.
They are a bit fragile, but I designed them like that on purpose in that size, that they are not taking much space on the LED side, also the space between the two holders are designed that you are at least a bit flexible where to place it.
In my case with the provided version I didn't break any of them, so they should be robust enough and in case not, they are fast to reprint. If anyone needs a thicker version, let me know, I can add another version of it.