1 / 1
Minisforum MS-01 Exhaust fan adapter 140mm — zdjęcie 1

Minisforum MS-01 Exhaust fan adapter 140mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bottom plate and fan cover for 140mm cooling fan.

Ocena
5 / 5
Polubienia
19
Pobrania
218
Wydruki
1
Wyświetlenia
2981
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Bottom plate to replace the original one with a mount for a 140mm fan, together with a hole to pass the cable inside the unit. Original plate used as base for the design. 2 small supports are needed at the connection to the front plate of the MS-01 (To support the 2 short lips).

Cover/Grill for the fan, with some room on top and on the side to pass the cable on the side of the fan.

With this whole assembly, the cables are not visible and connected directly to the motherboard, using the spare fan header. Noctua fan NF-A14 5V PWM as been used.

Tagi