Juggling pins/clubs holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount folder for 3 juggling pins/clubs
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 33
- Wydruki
- 2
- Wyświetlenia
- 196
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
I wanted a base for 3 holders, so I could attach it with 2 screws instead of 3. Or in case sticking it with double sided tape, to have a larger surface area.
Distance between centers of the holders is 10cm. In retrospect, I could have put 8-9cm since my pins are relatively narrow. But it's fine, the gap between them is small. In the 3mf I've put individual elements as well, if you want to change the gap for your use case.
I printed with PETG, 0.4 nozzle, 0.2 layer height, 15% honeycomb infill, no supports. I printed with the base facing down. It's not the most durable orientation, but it's not a lot of weight, and with PETG I think it should be fine. For more durability you can try printing it with the base upright, which would probably require supports.
In the end I've attached it with double sided tape, and it's holding fine.