1 / 7
Rod and Tube Cutter for Dremel with Limiter — zdjęcie 1
1 / 7

Rod and Tube Cutter for Dremel with Limiter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I just added a M6 nut inside of the Guide from GreaseMonkey88s Rod and Tube Cutter for Dremel (Thanks a lot for this…

Ocena
4,8 / 5
Polubienia
104
Pobrania
430
Wydruki
6
Wyświetlenia
3137
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

I just added a M6 nut inside of the Guide from GreaseMonkey88s Rod and Tube Cutter for Dremel (Thanks a lot for this Design!).
I added a wing nut on the bolt to change the height without tools.
I also made a version based on rckabs Rod and Tube Cutter for Dremel Flex Shaft for the flex shaft, because my Dremel 4000 ist to fat and touches the base.
I use it to cut the outer shell of stainless steel microwave coaxial cables and I needed something to limit the cutting height.

Print Settings

Printer Brand:

Anet

Printer:

A8

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.2

Infill:

30%

Category: Hand Tools

Tagi