THE CHONKERS - robust 3D printed pliers (TESTED)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a pair of pliers specifically designed to be 3D printed.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This is a pair of pliers specifically designed to be 3D printed.
I highly recommend printing them in ASA or PETG with at least 3 perimeters, 4 top\bottom solid layers, and 30% infill. Print washer in PLA or other slippery plastic with 0.15 layer height.
Chonkers are one of the toughest 3D printed pliers, but keep in mind that they're still made from plastic.
They're primarily designed to be used with other 3D printed parts - removing brim and support, getting in or out part with tight fit etc. They're the best tool for this kind of job, because you won't destroy your print while trying to work on it.
You can use them for some metal work, but again, only delicate work. In this case Chonkers take the empty space between strong tweezers and regular pliers.
I recommend printing the screw sideways with supports. If printed vertically, the screw cannot withstand the full force of these pliers, will brake and cause you a headache. Only install the screw once, the threads on pliers are not reusable and will fail.
If you brake the screw, screw up (hahahaha) the thread on pliers or just having none of it - these pliers can be assembled with M4\M5 hardware, but will require a little bit of postprocessing for it.