Qidi Plus 4 Vented Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Standard Digital File License
- 40in² vented space
- No hardware Necessary
- Just under 850g of filament for all pieces (2 walls 15% cubic subdivision infill)
- Super Glue optional
- 10 pieces in total
- Spool Riser with cap included
- Minimal supports needed
- No filing/cutting/adjusting necessary
Suggestions:
Use normal settings at .24 layer height to save on time.
ABS/ASA if chamber temps will exceed 45-50 degrees celcius.
To fill the gaps by the handles, cut a 165mm x 4mm x 3mm strip of EVA foam or similar material.
Though not needed, superglue can be used to join the 4 main pieces for a permanent connection.
Spool riser printed with 4-6 walls and 40% infill of anything stronger than PLA.