1 / 2
Side to Side rotate For 20mm Box Steel — zdjęcie 1
1 / 2

Side to Side rotate For 20mm Box Steel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Needed to allow a 2 meter length of 20mm Box Steel to rotate so made this up

Ocena
0 / 5
Polubienia
1
Pobrania
7
Wydruki
0
Wyświetlenia
60
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

Needed to have a piece of box steel rotate while staying straight up.

The outter sleeve secures to a wall or anything solid using 8mm wide screws or the holes can be drilled out and use whatever you have, while the inner insert can be moved to the position needed and secured with an 6mm bolt (Or alternatively drill out the hole and use whatever you have.

 

For my purposes i needed it to be solid so i printed @50% infill W/5 Wall Perimeters @0.28mm height with an 0.4mm nozzle- Struggled with bed adhesion so also printed with an outter brim

Tagi