V2 UPDATE IN PROGRESS - Storage Case with Tattoo Gun Kit and Blank Inserts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update in progress, files are 90% finished Storage Case with Tattoo Gun Kit and Blank Inserts.
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 887
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
STEP BY STEP INSTRUCTIONS IN A PDF IN FILES!!
(I put a lot of time into them so plz use!)
note: not fully tested due waiting for filament to come!
Bill of Materials -------------------------------------------------------------
10 - M5x16mm Phillips Head Machine Screws
10 - M5xH9.5 Heat Inserts (Any Height shorter than 15 mm works)
4 - M3x16mm Phillips Head Machine Screws
4 - M3xH5 Heat Inserts (Any Height shorter than 15 mm works)
Super Glue! (For the top lid handle and drawer locking pins part A and B)
All parts will fit on a 220mm x 220 mm print bed!
Printing Tips ----------------------------------------------------------------
The inserts for the top and bottom are printed in TPU while the rest in any hard filament.
To do an accent color as shown the follow parts need to be separated and printed in the separate color -
drawer_locking_pin_Aside
drawer_locking_pin_Bside
Drawer
upper_case_lid_hinges_pair
upper_case_lid_lock
Update 1-8-24---------------------------------
Optional files were added splitting the top lid in two pieces to fit on a 220x220 mm print bed
V2 - Update - 5-6-25-----------------------------------------------------
in progress