1 / 3
1/4" GM 220 TBI injector pod spacer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1/4" Spacer for the GM TBI injector pod to improve air flow.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 73
- Wydruki
- 1
- Wyświetlenia
- 196
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 4)Remiksy (0)Kolekcje (10)Powiązane
This is my first model. I printed this model with 0.2mm layer height, top/bottom pattern lines, infill pattern lines, 70°C bed temperature, 240°C extruder temperature, max fan speed of 50%, and part cooling fan off. I used PETG which will resist gasoline and most other solvents.