Plant Incubator - V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plant Incubator for single planter pot is a starting point for exploring more advanced solutions in the future.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Plant Incubator is a prototype developed under tight deadlines as a basic version of a project I will likely revisit in the future to make improvements. I was asked to create a simple and functional station for growing a small indoor potted plant, maintaining an essential yet pleasing design inspired by the concept of a "home."
The model is designed for quick and intuitive assembly, focusing on optimizing 3D printing with minimal support usage. The structure includes a hole at the base for inserting a full-spectrum 8mm LED strip from below, which can be slid up to the roof. A 9mm hole at the top allows the LED strip to exit, and it is then glued to the flat surface between the sloping walls. A protective lampshade, also glued underneath the roof, completes the lighting setup.
Main features:
- Materials: Printed in Black and Transparent PLA.
- Dimensions: Approximately 238 mm tall x 110 mm wide and deep.
- Design: Clean and essential lines, perfect for indoor use.
- Assembly: Quick and straightforward with minimal steps.
- 3D Printing: Optimized for a 0.4 nozzle, 0.2 mm layer height, 15% infill, and tree supports for the model's holes.
Even in this basic version, it offers a practical and aesthetically pleasing option for anyone looking to grow a small potted plant with the help of artificial lighting.