Anycubic ACE Pro Filament Saver & Alignment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ACE Pro works great but, in some cases, could produce some false filament feed alerts or clogs
- Ocena
- 5 / 5
- Polubienia
- 113
- Pobrania
- 763
- Wydruki
- 3
- Wyświetlenia
- 5013
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Anycubic ACE Pro works great but, in some cases, could produce some false filament feed alerts or clogs. This mod could reduce to almost zero when you use cardboard spools or when your spools are near to being finished.
Two versions available:
- Using ECAS to fix the PTFE
- With a threaded hole to fix the PTFE screwing it
You can cut the PTFE around 8-10 cm and screwing it to the filament guide or the holder if you use the threaded version instead ECAS.
Suggested to use with the filament guide end for PTFE screwing it:
https://makerworld.com/en/models/172221#profileId-193544
Tested on ACE Pro last revision, included in Kobra S1 Combo, this new version includes a new spool guide and this mod will use as a stop to prevent movements, if you have issues, or you have old ACE Pro version use double tape to paste.
Free my models 4cc2f87fc5fda4c0a8dd6a5560ad3406