NMBS fence older type H0 1:87
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Belgian concrete NMBS fence older type H0 1:87
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 175
- Wydruki
- 0
- Wyświetlenia
- 342
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a typical OLD Belgian concrete fence in 1:87. You could find these all over Belgium near railroad stations or other NMBS places, but this version was replaced by a newer model. I only know of 1 place where you can still find them today.
The pole has 3 slots in it, where the fence fits into. If you wanted to modify this to be printed with a PLA printer (flat), I would suggest making the slots biggers in the poles and flattening the ends of the plate. But I prefer to use the resin version, as the slots make you always have the same distance at the ends. (it somewhat clicks together)
I opted the put a 1mm round end at the base of the poles, to make it easier to mount them on your train display (drilling a round hole is cleaner than fitting a square pole)
printed with and designed for Anycubic Photon Mono 2