Zassenhaus "Rostock" blade holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part for blade holder in the bottom of the Zassenhaus "Rostock" nutmeg grinder
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
The plastic thingy that holds the removable blade in place below my nutmeg grinder broke (see pictures), so I remodeled it in OpenSCAD.
Printed in black PETG on Prusa Mini+.
Supports were a bit tricky, used custom supports only below the rectangular overhang part (the hole below allows for the supports to be placed on the print sheet). Problem is that is also the funcional surface where the metal blade part is screwed in, so it has to be rectangular. Carefully removing the supports and smoothing the remainders by inserting and removing the metal thingy a few times works however.