1 / 3
Anti-vibration z-tops for Prusa MK3(S+) (different tolerances)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Felt the extruded section that clamped the z-rods was a little too extreme.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
I loved the idea, but while the original remix did snug up the rods, made my z-tops bend up a bit.
I reduced the extruded section until the tops were square with the frame. Mainly for aesthetic purposes. Still clamps the rods nicely. #ocd