iPad Wedge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
10-degree pitch wedge and meant for iPad 10th gen with a case.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Standard Digital File License
Hey everyone,
YVR3DPrints here with an iPad wedge for those who like to take notes and need a bit of an angle to see/write better. This is a 10-degree pitch and made to use little plastic, hence the big elliptical holes.
The wedge was designed in mind for iPad 10th Gen with a case but feel free to scale to your needs.
I've printed this out in PLA+ at 0.28mm layer height, with 4 bottom & top layers, 3 perimeters for vertical and 5% infill.
No Supports needed.
Feel free to buy me a coffee if you like this.
https://buymeacoffee.com/yvr3dprints