Prusa MK2 PINDA probe protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Not my design, but from whoever design for the MK2.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 92
- Wydruki
- 1
- Wyświetlenia
- 980
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Not my design, but from whoever design for the MK2. I basically redraw the thread and the hole from the original one from the official site since I cannot get it to fit nicely on the PINDA probe if I print it with PETG. Anyway, I just want to share with all the MK2 owners who had the fitment issue of the original one.
Print instructions
Category: 3D Printer Parts Print Settings
Printer Brand: RepRap
Printer: Prusa MK2
Rafts: No
Supports: No
Resolution: 50 microns
Infill: 15-20%
Notes:
I printed mine in PETG and it fit nicely after cleaning up the strings with sand paper (please do it lightly). Happy printing.
p.s. I haven't try another other setting, but I think 100 microns should work as well