Filament Oiler for Prusa MK2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom design filament oiler for Prusa MK2. Works well with PTFE tube with 4mm outer diameter.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 585
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Custom design filament oiler for Prusa MK2. Works well with PTFE tube with 4mm outer diameter.
I redrew and redesign the whole filament oiler body, and it is inspired by Shii's filament guide.
Print instructions
Category: 3D Printer Accessories Print Settings
Printer Brand: RepRap
Printer: Prusa MK2
Rafts: No
Supports: Yes
Resolution: 200 microns
Notes:
Support is required for the filament guide/oiler body. Brim is recommended for the oiler cap if printed in current orientation. I believe you can print the cap upside down without brim.
Printed in PETG. Holds up pretty well on my MK2. I am sure PLA should work as well. Happy Printing.