1 / 4
Thermalright AXP90-X47/X53 CPU Cooler 92mm to 120mm Fan Conversion Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter to enable the use of a 120mm fan.
- Ocena
- 5 / 5
- Polubienia
- 92
- Pobrania
- 1390
- Wydruki
- 3
- Wyświetlenia
- 10 483
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 3) (Komentarze: 39)Remiksy (2)Kolekcje (109)Powiązane
I designed this conversion adapter to mount a 120mm fan I had on hand because I didn't like the appearance of the stock fan included with the AXP90-X47.
Required other than printed parts:
4x M3x5x4mm heat-set Inserts
4x M3 screws, suitable length for the thickness of the fan
Notes:
- The filament used should be heat-resistant, such as ABS, ASA, or PC. It is advisable to avoid using PETG, just in case.
- In addition to using heat-set inserts, the fan could also be secured with self-tapping screws or rubber fan mounts.
- For your reference, my setup consists of an SFF case, the FormD T1 v2.0, paired with the ASUS ROG STRIX B650E-I GAMING WIFI motherboard.
- The heatsink on my AXP90-X47 measures 87x95mm, but someone else reported that their unit has a 90x98mm heatsink. I haven’t seen it in person, but I’ve also released a version of the design to fit the 90x98mm size. If anyone knows the reason for this size difference, I’d appreciate it if you could let me know.
