Caliper Sheath (Pouzdro na šupleru)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple, space-saving sheath for your caliper
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Having stepped on the original box for my caliper, I was looking for a replacement, and decided to save space in my toolbox by designing a single-piece sheath that would flow around the shape of the caliper more closely, rather than making a new box.
Printing
I provide two types of STL: one for printing in one piece, and another pair to print the head and the tail separately. The two pieces slide together and hold. They are not meant to be open regularly, but of course they would separate if you wanted to replace one or other.
I print both parts standing up on my MINI, as the attached 3MF file shows.
Adjustment
The source SCAD file is attached. All the configurable parameters are concentrated at the beginning, and described with comments. If you want to modify the source for your caliper, just measure it and set the dimensions (length, width, thickness) as required.
The figure shows approximately what can be configured in the SCAD file, and how I decided to call it. When setting the main dimensions (length, width, thickness) they are the inside dimensions.