Rise Garden Roma light brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modification to add more lights to the rise garden
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
This is to add extra lights to your Rise Garden for more watts, I liked the Roma extension but I didn't want to pay $1600 for another garden.
This uses 2ft T8 Barinna Lights from Amazon this will add 48watts of leds to each level. I have used these lights on many projects for years and haven't had a single one burn out yet.
These will only work on the two or three level family garden, first and second generation (not sure about the third) and will not work on the top level. ( working on something for the top level)
Fair warning this will add heat to your garden, you will require fans and or a water cooler, I have both. My water gets too hot, into the 80s even without added lights, you want 65-75F water, shoot for 68F
This should allow you to grow more fruiting vegetables, the rise garden can grow some but does not have enough watts per square foot for anything substantial, this will bring it up to the threshold.
Still a work in progress, I have successfully added lights to many of my other gardens with great results currently testing these.
These brackets are tight and slide onto the ends of the lights and then hook onto the level above, one light on each side of the level.
Each rise level has 60Watts of leds this will bring the level to 108watts the actual Roma Model has 200watts so this does still fall short but should be great supplemental lighting.
Preferably print in PETG or ASA.
US- https://www.amazon.com/Barrina-Equivalent-Bright-Spectrum-Sunlight/dp/B082ZL1Q63?ref_=ast_sto_dp&th=1