Dimension Dog (Test/Calibration Model)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cute and simple calibration model designed to test your printer's accuracy, tolerances, and overhangs.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 183
- Wydruki
- 5
- Wyświetlenia
- 502
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Share Alike
Introducing, the Dimension Dog! A new cute calibration model to go along with the likes of CaliCat and the XYZ cube!
This model has several easily measurable dimensions to test the accuracy of your printer, includes both overhangs and bridging, and text on the base of the model. Dimension Dog even includes moveable ears to test out print-in-place mechanisms!
A print height of 0.2 mm is recommended, and no supports are needed.
Key dimensions include the width of the main body (20 mm), the height of the main body (15 mm), and the width of the tail (5 mm).
Prints in just under 45 minutes so makes a perfect drop-in substitute for many other test/calibration models.
Included is the .f3d file, so you can open it up to check any other dimensions you'd like, or remix to your heart's content.