Porsche 961 triptych filament paintings - HueForge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a triptych (3 piece artwork) of the legendary Porsche 961 racecar.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 254
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
I have included the HueForge files and the describe.txt files. I have used this model for the frames: https://www.printables.com/model/783801-parametric-frame-for-hueforge-filament-paintings
Swaps are as following:
Project: Porsche1.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 160x200mm in size
You may print at higher layer heights below the Min Depth of 0.2mm
The Max Depth is 3mm and the Actual Depth is 2.4mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA+ GST3D RED Transmission Distance: 5.5
PLA+ GST3D YELLOW Transmission Distance: 9
PLA Jayo Sky Blue Transmission Distance: 6.4
PLA+ GST3D WHITE Transmission Distance: 5
PLA Jayo White Transmission Distance: 6
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #4 (0.28mm) swap to RED
At layer #21 (0.96mm) swap to YELLOW
At layer #25 (1.12mm) swap to Sky Blue
At layer #31 (1.36mm) swap to WHITE
At layer #38 (1.64mm) swap to White for the rest.
----------------
Project: Porsche2.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 160x200mm in size
You may print at higher layer heights below the Min Depth of 0.2mm
The Max Depth is 3mm and the Actual Depth is 2.4mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA+ GST3D RED Transmission Distance: 5.5
PLA+ GST3D YELLOW Transmission Distance: 9
PLA Jayo Sky Blue Transmission Distance: 6.4
PLA+ GST3D WHITE Transmission Distance: 5
PLA Jayo White Transmission Distance: 6
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #4 (0.28mm) swap to RED
At layer #21 (0.96mm) swap to YELLOW
At layer #25 (1.12mm) swap to Sky Blue
At layer #31 (1.36mm) swap to WHITE
At layer #38 (1.64mm) swap to White for the rest.
----------------
Project: Porsche3.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 160x200mm in size
You may print at higher layer heights below the Min Depth of 0.2mm
The Max Depth is 3mm and the Actual Depth is 2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA+ GST3D RED Transmission Distance: 5.5
PLA+ GST3D YELLOW Transmission Distance: 9
PLA Jayo Sky Blue Transmission Distance: 6.4
PLA+ GST3D WHITE Transmission Distance: 5
PLA Jayo White Transmission Distance: 6
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #5 (0.32mm) swap to RED
At layer #19 (0.88mm) swap to YELLOW
At layer #23 (1.04mm) swap to Sky Blue
At layer #28 (1.24mm) swap to WHITE
At layer #36 (1.56mm) swap to White for the rest.