1 / 3
Mounting Bracket for 5 PTFE 4mm OD PTC
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a way to neatly mount 5 PTFE connectors for my Prusa XL. The mounting bracket can be mounted in any orientation and securely holds the connectors while still allowing access to the release rings.
Open the .3mf file for recommended bed layout and support settings. I made mine out of Overture Black PLA, but any filament will work just fine. Mine does require 2 M4 bolts to secure the top plate to the bottom plate. The file is setup for using M4x8mm threaded inserts in the bottom plate. You will also need 2 additional screws to mount the base plate to the wall, printer frame, or wherever you choose.